Trash Chute, Construction Chute, Roofing Chute & Demo Chute Wholesaler
Leading Edge Fall Protection Panel (1.25m)
$180.00
The HC52 leading edge fall protection panel is a premier modular solution for construction slab edges, roof perimeters and floor openings. OSHA compliant with reinforced steel mesh for maximum jobsite safety.
Designed for the rigors of modern formwork and steel erection, the HC49 provides a robust roof edge fall protection barrier. The 1.25m length is the “sweet spot” for many contractors, offering enough width to reduce component counts without becoming cumbersome for a two-person installation team. Whether used as scaffold edge protection or a perimeter guard for new pours, the 4.2mm wire thickness ensures zero deflection under standard impact loads.
Key Advantages
- Optimized Coverage: Accelerates the deployment of temporary edge protection systems on large-scale floor plates.
- Safety First: Engineered to prevent tool-drops and personnel falls in accordance with OSHA leading edge fall protection guidelines.
- Visibility: Features an integrated toe-board area and open-mesh design to maintain site sightlines without sacrificing security.
Specifications
- Model: HC49
- Dimensions: 1.25m (L) x 1.06m (H)
- Mesh Grid: 75 x 150mm
- Material: High-tensile structural steel.
The HC52 leading edge fall protection panel is a modular steel mesh guardrail panel specifically engineered for construction sites where workers are exposed to leading edge fall hazards. At 1250mm wide, this panel provides reliable perimeter protection along slab edges, roof perimeters, floor openings and elevated work areas where OSHA 1926.501(b)(2) compliance is required.
The HC52 leading edge fall protection panel integrates seamlessly with all HodChutes posts and ground support components — creating a complete, reusable edge protection system that can be deployed and relocated as the leading edge advances through the construction process.
Leading Edge Fall Protection Panel Applications
The HC52 leading edge fall protection panel is the standard coverage panel for:
- Construction slab edges and floor perimeters during multi-story building work
- Roof perimeters during roofing, HVAC and solar installation projects
- Floor openings and shaft protection during construction phases
- Elevated work areas where OSHA leading edge fall protection is required
- Any site requiring OSHA 1926.501(b)(2) compliant perimeter guardrailing
Key Features
- Reinforced steel wire mesh — exceeds standard leading edge fall protection requirements
- High-visibility safety yellow powder coat or galvanized finish
- OSHA compliant — meets leading edge fall protection standards
- Modular design — integrates with all HodChutes posts and base clamps
- Dimensions: 1.25m (L) x 1.06m (H) | Model: HC52
- Compatible with all standard top-mount, side-mount and parapet clamp posts
For OSHA leading edge fall protection requirements visit OSHA 1926.501 Leading Edges.
Complete Your Edge Protection System
The HC52 leading edge fall protection panel works with all HodChutes panels and posts for complete perimeter coverage:
- Steel Edge Protection Barrier 1.0m
- Temporary Roof Edge Protection System 1.5m
- High-Efficiency Edge Protection Panel 2.0m
- Maximum Span Edge Protection Barrier 2.5m
- Parapet Clamp Post HC46
- Reinforced Parapet Clamp Post HC48
For installation guidance contact us for a free project consultation and materials list.
Frequently Asked Questions
What is a leading edge fall protection panel?
A leading edge fall protection panel is a rigid modular steel mesh barrier that forms part of a temporary guardrail system at construction leading edges. It installs between posts along slab edges, roof perimeters and floor openings to create an OSHA-compliant fall prevention barrier that protects workers from leading edge fall hazards.
When is a leading edge fall protection panel required by OSHA?
Under OSHA 1926.501(b)(2), any employee constructing a leading edge 6 feet or more above a lower level must be protected by a guardrail system, safety net, or personal fall arrest system. A leading edge fall protection panel installed as part of a complete guardrail system satisfies this requirement.
Does the HC52 meet OSHA leading edge fall protection requirements?
Yes. The HC52 leading edge fall protection panel is OSHA compliant and engineered to meet leading edge fall protection requirements for construction sites. It is constructed from reinforced steel wire mesh and finished in high-visibility safety yellow.
Is the HC52 compatible with other HodChutes edge protection posts?
Yes. The HC52 leading edge fall protection panel is fully compatible with all HodChutes posts including top-mount, side-mount, parapet clamp and adjustable base support posts — making it a fully modular component of any HodChutes edge protection system.
