Slab Grabber Guardrail Post (1350mm)

1350mm Slab Grabber Guardrail Post

A threaded, adjustable 1350mm slab grabber guardrail post that clamps directly onto the edge of a concrete slab — no drilling, no bolts, no flange plate. This is the taller of our two slab grabber sizes at 1350mm, built for jobs where the extra height or slab profile calls for it.

Need the standard adjustable model? View our 1100mm Slab Grabber Guardrail Post → — covers the broader use case with a confirmed 152–610mm adjustment range.

Why Contractors Choose This Product

• No drilling or anchor bolts — clamps directly onto the slab edge
• Fast to install and relocate as work progresses
• Reusable across multiple floors or phases
• Taller profile for jobs needing the extra reach
• Compatible with HodChutes Steel Mesh Panels, and pairs with Top Rail, Mid Rail, and Toe Board
• Powder-coated steel finish

Part of the full Edge Protection product line.

Choosing the Right Post

Choose Bolt-Down if: ✔ Permanent or semi-permanent installation ✔ Your surface can be drilled ✔ Roof decks or fixed slab installations

Choose Fascia-Mount if: ✔ You need the walking surface completely clear ✔ Installing on a deck, balcony, or accessible slab face ✔ The vertical face of the structure is accessible

Choose a Slab Grabber if: ✔ Temporary, relocatable protection ✔ Fast installation with no drilling ✔ Multi-story concrete work where posts move floor by floor

Installation Sequence

1. Measure the slab edge thickness (adjustment range for this size still pending confirmation — see the 1100mm page for a confirmed 152–610mm fit)
2. Position the clamp over the slab edge, post perpendicular to the surface
3. Tighten the threaded handle until the grabber is fully seated
4. Verify a secure, snug fit against the slab
5. Attach the steel mesh panel to the mounting brackets
6. Install top rail, mid rail, and toe board as required

Specifications

• Height: 1350 mm (53.1″)
• Post thickness: 2 mm
• Horizontal crossbar: 400 mm
• Mounting: Threaded slab-edge clamp (adjustable — exact range to be confirmed)
• Finish: Powder coating
• Material: Steel
• Weight:
• Color: Pink
• Included components: slab grabber
• Optional accessories: Not applicable

Common Questions Before Ordering

What slab thickness should I measure before ordering? Measure your slab edge thickness and check against the confirmed range once available, or use our 1100mm Slab Grabber Guardrail Post (confirmed 152–610mm range) if you need a verified fit today.

How many posts do I need for my run? You can work with our team to directly review plan or floor drawings to determine exactly how many slab grabber guardrail posts you will need. We’ll provide exact quantities and calculations for you.

Which mesh panels fit this post? HodChutes Steel Mesh Panel is built to the same bracket spacing (40mm width, 85mm horizontal / 120mm vertical) as this post, so they install as a matched pair.

Can I mix these with existing guardrail systems I already own? The bracket spacing is specific to HodChutes components. We haven’t verified compatibility with other manufacturers’ rail or mesh systems — check bracket dimensions before combining brands.

Which accessories are required to complete the system? Nothing needed. Quick and easy installation.

Typical Applications

✓ Concrete slab edge protection ✓ Multi-story construction ✓ Parking garage construction ✓ Commercial building projects ✓ Taller slab or deeper-profile applications ✓ Temporary perimeter guardrails

Slab Grabber Size Comparison

How a Slab Grabber Works

A 1350mm slab grabber guardrail post clamps directly onto the bare edge of a concrete slab using a threaded tensioning mechanism — turn the handle to tighten the clamp against the slab edge until it’s secure, no drilling or anchor bolts required. This makes it the fastest guardrail post to install and relocate as work progresses across a multi-story pour.

Pairs with the full Steel Edge Protection System for a complete leading-edge fall protection setup →

Installation Notes

Position the clamp over the slab edge with the post perpendicular to the slab surface, then tighten the threaded handle until the grabber is fully seated. Re-check tightness after the post has been in place under load, and re-inspect any time the post is relocated to a new section of slab edge.

Why Choose HodChutes

✓ Direct manufacturer — no middleman markup ✓ U.S. delivery, with many orders shipped in approximately 5 business days ✓ 24/7 virtual support ✓ Compatible with the full HodChutes Steel Edge Protection System ✓ Powder-coated steel construction

OSHA generally requires fall protection under 29 CFR 1926.501 whenever employees work on a walking/working surface with an unprotected edge 6 feet or more above a lower level — a fascia-mount post is one way to meet that requirement without drilling into the top surface.

Compatible Products

• Steel Mesh Panel
• Top Rail
• Mid Rail
• Toe Board
• Bolt-Down Guardrail Post
• Fascia-Mount Guardrail Post
• Slab Grabber Guardrail Post — 1100mm

FAQs

What slab thicknesses does this fit? Adjustable range to be confirmed with manufacturer specs before publishing — do not state a number until verified.

Does a slab grabber require any drilling or anchoring into the slab? No — it clamps onto the existing slab edge using a threaded tensioning mechanism, leaving the slab itself undrilled.

How is this different from the 1100mm Slab Grabber Guardrail Post? This is the taller, thicker-post version (1350mm height, 2mm post wall) with a confirmation-pending adjustment range. See our 1100mm Slab Grabber Guardrail Post for the confirmed 152–610mm range.

CTAs

• Request a Quote
• Contact an Edge Protection Specialist